Code Embed

And that’s it – when the post is viewed or previewed, {{CODE1}} will be replaced with the code that you asked to be embedded.

This should get you started – for more information and advanced options, please see below. Alternatively, there’s a fantastic guide at Elftronix which I would recommend.

Using this plugin with the block editor (aka Gutenberg)

By default, custom fields are hidden inside the block editor but can be revealed.

1. 05Edit or create a post.
2. 06Click the settings button (three dots) in the top right-hand corner.
3. 07Go to Preferences.
4. 08Click the Panels tab.
5. 09You will find a button to toggle the ‘Custom Fields’ meta box – make sure this is toggled to “on”.
6. 10A button should appear titled “Enable & Reload” – you’ll need to click on that and wait for the page to reload before the custom fields will appear.

Check out the screenshots for how the custom fields should look.

I can’t find the custom fields

For block editor users, I’m assuming you’ve done the above. For classic editor users, the custom fields should be present by default. In all cases they should appear at the bottom of the editor screen.

From version 2.4, anyone without the “unfiltered HTML” capability won’t be able to use custom fields, for added security. Please see the section “Custom Field Security”, below, for more details.

If none of the above applies, then you may have a theme or plugin that removes this or may have a problem with your WordPress installation – you will need to try the usual diagnostics to try and resolve this, including requesting help on the WordPress support forum .

The Code Embed Options Screen

While in WP Admin, if you go to Settings -> Code Embed, you’ll be able to access the options that are available for this plugin.

Code embedding is performed via a special keyword that you must use to uniquely identify where you wish the code to appear. This consists of an opening identifier (something that goes at the beginning), a keyword and then a closing identifier. You may also add a suffix to the end of the keyword if you wish to embed multiple pieces of code within the same post.

From this options screen, you can specify the above identifier that you wish to use. By default, the opening and closing identifiers are double braces and the keyword is CODE . During these instructions these will be used in all examples.

The options screen is only available to those with a capability to manage options or greater. All the other Code Embed menu options are available to users with a capability to edit posts or greater.

How to Embed Code

To embed in a post, you need to find the meta box under the post named “Custom Fields”. If this is missing, you may need to add it by clicking on the “Screen Options” tab at the top of the new post screen.

Now create a new custom field with the name of your keyword – e.g. CODE . The value of this field will be the code that you wish to embed. Save this custom field.

Now, wherever you wish the code to appear in your post, simply put the full identifier (opening, keyword and closing characters). For example, {{CODE}} .

If you wish to embed multiple pieces of code within a post, you can add a suffix to the keyword. So we may set up 2 custom fields named CODE1 and CODE2 . Then in our post we would specify either {{CODE1}} or {{CODE2}} depending on which you wish to display.

Don’t forget – via the options screen you can change any part of this identifier to your own taste.

How to Embed Code from an External URL

If you specify a URL within your post, surrounded by your choice of identifiers, then the contents of the URL will be embedded within your post.

Obviously, be careful when embedding a URL that you have no control over, as this may be used to hijack your post by injecting, for example, dangerous JavaScript.

For example, using the default options, you could embed the contents of a URL using the following method…

{{http://www.example.com/code.php}}

or

{{https://www.example.com/code.html}}<h3>How to Use Global Embedding</h3>

You can also create global embeds – that is, creating one piece of embed code and using it in multiple posts or pages.

To do this, simply make reference to an already defined (but unique) piece of embed code from another post or page.

So, let’s say in one post you define a custom field named CODE1 . You can, if you wish, place {{CODE1}} not just in that post but also in another and it will work.

However, bear in mind that the embed code name must be unique – you can’t have defined it in multiple posts, otherwise the plugin won’t know which one you’re referring to (although it will report this and list the posts that it has been used in).

In the administration menu, there is a sidebar menu named “Tools”. Under this is a sub-menu named “Code Search”. Use this to search for specific embed names and it will list all the posts/pages that they’re used on, along with the code for each.

Embedding in Widgets

Natively, you cannot use the embed facilities within sidebar widgets. However, if you install the plugin Widget Logic , then Code Embed has been set up to make use of this and add the ability.

• Install Widget Logic and activate.
• In Administration, select the Widgets page from the Appearance menu. At the bottom there will be a set of Widget Logic options.
• Ensure ‘Use widget_content filter’ is ticked and press Save.

Although you cannot set up embed code within a widget, you can make reference to it, for example by writing {{CODE1}} in the widget.

Responsive Output Conversion

Responsive output is where an element on a web page dynamically resizes depending upon the current available size. Most video embeds, for instance, will be a fixed size. This is fine if your website is also of a fixed size; however, if you have a responsive site then this is not suitable.

Code Embed provides a simple suffix that can be added to an embed code and will convert the output to being responsive. This works best with videos.

To use, when adding the embed code onto the page, simply add _RES to the end, before the final identifier. For example, {{CODE1_RES}} . The _RES should not be added to the custom fields definition.

This will now output the embedded code at full width, dynamically resizing as required.

If you don’t wish the output to be full width, you can specify a maximum width by adding an additional _x on the end, where x is the required width in pixels. For example, {{CODE1_RES_500}} will output CODE1 as responsive but with a maximum width of 500 pixels.

It should be noted that this is an experimental addition and will not work in all circumstances.

Embedding in excerpts

By default, embed code will not appear in excerpts. However, you can switch this ability on via the Code Embed options screen. If you do this, then the standard rules of excerpts will still apply but only once the code embed has been applied. For example, excerpts are just text, a specific length, etc.

Filtering of code

By default, WordPress allows unfiltered HTML to be used by users in post custom fields, even if their role is set up otherwise. This opens up the possibility of leaving a site vulnerable, if any plugins that use this data don’t check it appropriately.

“Out of the box,” neither the contributor nor author roles have unfiltered HTML capabilities but can access custom post fields.

As this plugin requires the use of unfiltered HTML, we need to ensure that only authorized users can use it. From version 2.5, any users without this permission that update a post containing embeds from this plugin will cause the code to be filtered.

Plugin Behaviour Changes

Security hardening has meant that some changes to behaviour have had to change after specific releases. Here I’ll document any known changes…

• Version 2.6.4 – A global <script> embed will now have scripts stripped on any post authored by a user without unfiltered_html . Safe-HTML global embeds (iframes, video, etc.) are unaffected. Previously scripts rendered everywhere.
• Version 2.6.4 – Global embeds stored on a